Lihlahisoa
PIM DUPLEXER e tlase
| Moetapele-mw | Kenyelletso ea Duplexer |
Chengdu Moetapele oa Microwave Technology ke moetsi ea tsebahalang oa Chaena, ea ipabolang ka tlhahiso ea lihlahisoa tse tsoetseng pele tsa theknoloji ea microwave. Boqapi ba rona ba morao-rao, PIM duplexer e tlase, e etselitsoe ho fihlela litlhoko tse ntseng li hola tsa indasteri ea likhokahano ka ts'ebetso ea eona e holimo le ho tšoarella.
E 'ngoe ea likarolo tsa bohlokoa tsa li-duplex tsa rona tse tlase tsa PIM ke likhetho tsa tsona tse ntle tsa khokahano. E tla le likhokahano tsa SMA, N le DNC tse netefatsang hore li tsamaellana le lisebelisoa le litsamaiso tse fapaneng. Lihokelo tsena li fana ka khokahano e sireletsehileng le e tšepahalang, e felisang tahlehelo kapa tšitiso efe kapa efe e ka bang teng.
Ntle le moo, li-duplex tsa rona tse tlase tsa PIM li entsoe ka nepo ho fana ka maemo a tlase a passive intermodulation (PIM). PIM ke ntlha ea bohlokoa e amang katleho le boleng ba litsamaiso tsa puisano tse se nang mohala. Ka li-duplexer tsa rona, bareki ba fumana ho khopama ho fokolang ha PIM, ho bakang phetiso ea mats'oao e hlakileng, e sa sitisoeng.
| Moetapele-mw | Sebopeho |
■ Tahlehelo e Tlase ea Kenyo, PIM e Tlaase
■ Ho itšehla thajana ho feta 80dB
■ Mocheso o Tsitsitse, o Tšoara Litlhaloso tsa Mocheso o Feteletseng
■ Maemo a mangata a IP Degree
■ Boleng bo phahameng, theko e tlaase, Ho fana ka potlako.
■ SMA,N,DNC,Lihokelo
■ Matla a Phahameng a Phahameng
■ Meetso e Tloaelehileng e Fumaneha, Moralo oa theko e tlase, Moralo ka litšenyehelo
■ Ponahalo e fapaneng ea mebala,3 lilemo tse tiisetso
| Moetapele-mw | Tlhaloso |
LDX-2500/2620-1MSesefa sa "duplexer cavity".
| RX | TX | |
| Maqhubu a Range | 2500-2570MHz | 2620-2690MHz |
| Tahlehelo ea Kenyelletso | ≤1.6dB | ≤1.6dB |
| Ripple | Ø ≤0.8dB | Ø ≤0.8dB |
| Khutlisa Tahlehelo | ≥18dB | ≥18dB |
| Ho hana | ≥70dB@960-2440MHz≥70dB@2630-3000MHz | ≥70dB@960-2560MHz≥70dB@2750-3000MHz |
| Ho behwa ka thoko | ≥80dB@2500-2570MHz&2620-2690Mhz | |
| Pim3 | ≥160dBc@2*43dBm | |
| Impedanz | 50Ω | |
| Surface Finish | Ntsho | |
| Lihokelo tsa Port | N-Mosali | |
| Mocheso oa ho sebetsa | -25℃～+60℃ | |
| Tlhophiso | Joalo ka tlase(mamello±0.3mm) | |
Maikutlo:
Tekanyetso ea matla ke ea mojaro vswr ho feta 1.20: 1
| Moetapele-mw | Litlhaloso tsa Tikoloho |
| Mocheso oa Ts'ebetso | -30ºC ~ +60ºC |
| Mocheso oa polokelo | -50ºC ~ +85ºC |
| Ho thothomela | 25gRMS (15 degrees 2KHz) mamello, hora e le 'ngoe ka axis |
| Mongobo | 100% RH ho 35ºc, 95%RH ho 40ºc |
| Ho tshoha | 20G bakeng sa 11msec half sine wave,3 axis mahlakore ka bobeli |
| Moetapele-mw | Litlhaloso tsa Mechini |
| Matlo | Aluminium |
| Sehokedi | ternary alloy three-partalloy |
| Kopana le Basali: | boronse ea beryllium e entsoeng ka khauta |
| Rohs | lumellana |
| Boima ba 'mele | 0.5kg |
Setšoantšo sa Outline:
Litekanyo tsohle ka mm
Mamello ea Tlhaho ± 0.5(0.02)
Mamello ea Likoti tse Mount ±0.2(0.008)
Lihokelo Tsohle: N-Mosali
| Moetapele-mw | Lintlha tsa Tlhahlobo |